You are here:
Santos Boats Tests Touchscreen Durability for Marine Applications

Santos Boats Tests Touchscreen Durability for Marine Applications

To determine which touchscreen type best withstands salt, UV and cold, Santos Boats had two variants independently tested at M2LAB. After 720 hours of cyclic ageing, the results provided actionable data for better component selection in future boat models.

Trusted technology for marine applications

Santos Boats touchscreen marine application

Santos Boats develops high-quality boats and marine solutions where technology, sustainability and ease of use take centre stage. In modern vessels, digital interfaces such as touchscreens play a critical role in navigation, monitoring and system control.

Because this electronics is continuously exposed to salt, UV radiation, temperature fluctuations and moisture, reliability is essential.

The challenge: touchscreens under extreme marine conditions

Marine touchscreens must perform reliably under demanding conditions including:

  • UV radiation from sunlight
  • Salt spray and corrosion
  • Wide temperature fluctuations
  • High humidity

Standard displays are at risk of moisture ingress between glass and display, loss of brightness or clarity, and shortened service life. Santos Boats therefore sought independent durability testing of two touchscreen types.

Approach: 720-hour cyclic ageing test

M2LAB conducted a 720-hour cyclic ageing test in accordance with ISO standards. The test cycle comprised three consecutive climate simulations, together replicating the conditions of long-term marine use:

  • UV test: UV-A radiation at 60 °C, followed by condensation cycles at 50 °C
  • Salt spray test: exposure to sodium chloride solution, comparable to seawater
  • Low-temperature test: exposure down to –20 °C

This cycle was repeated to simulate realistic long-term stress on marine electronic components.

Cyclic ageing test touchscreens M2LAB

Results: objective data for better component selection

After 720 hours, both touchscreens were assessed visually. The results showed which type performed best in terms of moisture resistance and sealing under marine conditions.

The test data provide Santos Boats with valuable insights for product development:

  • Better selection of marine-grade components
  • Higher reliability of digital interfaces
  • Reduced maintenance and fewer failures for end users

Thanks to independent laboratory testing, Santos Boats can now integrate durable, reliable technology into future boat models — not based on assumptions, but on measurable data.

De Coating Nerd

“Waar ik ook ben, op mijn werk of als ik vrij ben, ik kijk naar alles waar een verflaagje op zit. Helemaal als er iets mis mee is. Roestplekken, blaasjes en afbladderende verf, daar word ik gelukkig van! Nou ja, gelukkig… dat is wat overdreven. Maar ik vind het machtig interessant. Wat een mazzel heb ik dan ook dat ik hier mijn beroep van heb mogen maken. De hele dag onderzoek doen aan verfsystemen, ge(poeder)coate voorwerpen en bedrijven helpen bij het verbeteren van hun product.”

Latest articles

Any questions?

Have a question? Want to consult with an expert about which test is best for you? Would you like to have a test performed? If so, please contact us.

Questions? Get in touch with one of our specialists!