Thousands of motorway gantries are rusting
In this series we put the coating of a wide range of products, objects and structures under the microscope. This time: the gantries above the motorway. Three findings and one question that matters: could this have been prevented?

From a distance: the A2 near Empel had to close
A rusting gantry was no longer safe and had to be removed. It is not an exception: gantries like this stand all over the Netherlands.
On closer inspection: three findings
Up close, we see three things: a defect, a risk and a point of attention.
1. Rust on edges and welds (defect)
Observation: corrosion starts on the edges, at the welds and around the bolted connections. That is where rust breaks through the paint first.
Cause: the paint layer is thinner on edges, and welds are hard to prepare properly. They are always the weak spots of a structure.
The question: is there a zinc layer under the paint that protects exactly these spots?


2. Aggressive environment above the road (risk, inland too)
Observation: the gantry hangs above traffic day and night: exhaust fumes, spray and de-icing salt.
Consequence: acidic and salty deposits lower the pH on the steel and accelerate corrosion. Even far from the sea.
The question: was the corrosivity category determined for the spot where the gantry actually hangs, not just for the region?
3. Too little capacity for maintenance (point of attention)
Observation: Rijkswaterstaat, the Dutch road authority, manages thousands of these gantries. Contractors have nowhere near enough capacity to maintain or renovate them.
Consequence: motorways have to close more often, like the A2 near Empel in August. That costs road users time and money.
The question: how much of this maintenance would have been needed if the gantries had been properly protected from the start?


Buy cheap, buy twice
A gantry spanning three lanes costs around € 50,000 and weighs roughly 5 tonnes of steel. Galvanising then costs roughly € 3,000 to € 5,000. That is 6 to 10% of the price.
But what do early replacement, recoating or repairs cost? And a closed motorway?
Galvanised and coated, a gantry easily lasts 25 years without rust. That makes the problem a lot smaller.
How could this have been prevented?
With galvanising, a suitable paint system and a test that confirms it.
- Galvanise. Hot-dip galvanising or thermal zinc spraying, depending on the size. Not only near the sea, inland too.
- Specify. Choose the paint system for the actual exposure above the road and the required service life, according to ISO 12944.
- Test. Verify the system beforehand with the tests from ISO 12944, plus a Kesternich test for acidic conditions.
This avoids disputes about quality and costs afterwards.
The art of specifying
How is the corrosion protection of your structure specified? Corrosion protection largely determines the service life of a steel structure. Is that as clear to your supplier as it is to you?
M2LAB helps companies clarify these expectations, specify them professionally and verify them.
Coating under the microscope
An in-house inspection by M2LAB.